• 【6 in 1 stud finder up to 4.72inch/120mm】: Multiple Scan Modes including exact scan and deep scan offers you six different scanning scenes for you to choose. Stud Exact scan mode finds the center of the stud, while deep scan mode detects the width of larger objects like pipes and wires.The magnetic stud finder is capable of detecting magnetic metals up to a depth of 4.72 inch (120 mm), be more useful for finding plumbing behind walls.
• 【Prevent accidental drilling & Protecting Pouch】: The automatic calibration before use provides users with maximum reliability and accuracy, significantly reducing errors in the application. Wire Warning Detection works up to 2 inches(51mm) deep to avoids AC lines, and would always be on while scanning in Stud Scan and Metal Scan Modes . Most popular pvc bag are essential for preserving items and avoiding safety hazards during construction.
• 【Intelligent Microprocessor Chip】: The wall stud finder adopts an intelligent micro-sensor chip with the highest sensitivity which can accurately and quickly find edges and center of metal, studs, joists, pipes, and live AC wire behind walls, floors, and ceilings. Ideal for mounting curtain rods, shelves, picture frames, handrails and shockproof metal hardware. Whether professional, homeowner or DIY enthusiast, this bar scanner is extremely practical.
• 【Audio Alarm&HD LCD Display 】: The stud stud finder has a large LCD display that allows a clear display even in low light conditions. It displays detection mode, centering and low battery level and provides a clear acoustic warning for accurate and effective object location. Fast detection saves time and effort.

Product Description

Technical Data:

• Automatic shutdown time : 5 minutes
• Working humidity range:
• 0-85%RH in metal mode
• 0-60%RH in foreign body mode
• Operating temperature range: -10℃ +50℃
• Storage temperature range: -20℃ +70℃
• Battery: 2*1.5V AAA alkaline battery
• The usage time : about 2 hours
• Body size: 159.5*77*22.3mm

Maximum Detection Depth:

• Ferrous metal 120 mm
• Non-ferrous metal (copper) 100 mm
• Alternating current (ac) 50 mm
• Copper wire (≥4 mm² ) 40 mm
• Foreign body (Generally refers to the wooden block） exact mode 20 mm /deep mode 38mm

PIGADA STUD FINDER ZK02 & ZK01

• Offers GREAT ACCURACY AND CONSISTENCY

which makes DIY & HOME Projects More Interesting, Easier And Safer.

The Usage Of Stud Finder And Points For Attention

Points For Attention

MODE FOR Wooden

• 1. The operating environment of the instrument needs to be operated at a humidity of less than 60%RH
• 2. Before use, the instrument must be calibrated to zero on the detection surface, and the next detection can be performed after 0K
• 3. There should be no moisture in the operation interface.
• 4. This instrument is only used for surface detection of gypsum board or homogeneous wood board
• 5. When operating and moving, try to move slowly and at a uniform speed, not sometimes fast and sometimes slow
• 6. When operating, let the product purple paste detect the surface, and there must be no up and down shaking
• 7. Deep mode can be used to detect deeper wooden files

MODE FOR Electrical Conductor

• 1. The wire to be tested must be a single-strand copper wire
• 2. The wall, the rubber outside the wire, and the plastic tube covering the wire all have an attenuation effect on the AC signal, so the actual detection depth will be less than 5CM
• 3. The humidity of the AC detection environment must be less than 30%RH.
• 4. During the detection process, hands or fingers cannot touch the detection surface.
• 5. There are steel nets or metal objects on the wires that can shield the AC signal, and the AC may not be detected
• 6. If the machine beeps in open air, the instrument needs to be calibrated and reset to zero.

Exact Mode (Generally refers to the wooden block)

• Up to 20mm/0.79in;

• Long press to switch exact mode/deep mode.

• The exact mode scans through one layer of drywall, equipped with an intelligent micro-sensor chip with the highest sensitivityto improve in accuracy.

HOW TO USE: