RFID Electronic Cabinet Lock, Smart NFC Drawer Locks, Hidden Card Lock for Wooden Cabinet Cupboard Drawer Furniture
10 In Stock Out of stock 10
- 【1 Card For Multiple Locks】CODACE coolest hidden lock, you easily program 1 key into several locks as you wish and test it before installation, then you can use 1 key (RFID card/fob or NFC) to unlock several cabinet locks.(Frequency: 13.56mhz)
- 【NFC Setup】 Hold an existing transit card or bank card, configure it successfully, and add this card to iPhone Wallet (iOS). Copy your RFID key to your smartphone's wallet via NFC function (Android).
- 【High Suitability Mini Locks】RFID cards can penetrate through thicker wood panels (up to 40mm/1.6”). Fits doors up to 0"-1.3" thick, great for single double-door, sliding-door, wooden cabinets, gun boxes etc. For any non-wood surface, recommend using 3M tape to install instead of screws.
- 【Low Battery Auto-unlock】Low-battery status with a long beep, the lock can be used approximately 25 times, when battery is too low, the lock will automatically open, need to replace the battery. 【Battery or USB Powered】USB cable for emergency use. The new battery can be used for about 18 months.
- 【Sturdy Lock Kit】1 x Rfid lock,1 x Latch, 3 x Rfid card, 1x Screw set,1 x USB cable, 1x Induction label and User manual.
CODACE Hidden RFID/NFC Locks for Cabinet Drawer
- 1)3 Modes: single card, dual card (up to 13 cards can be configured), NFC function.
- 2)Sensing area up tp 50mm, installed vertically or horizontally.
- 3)4 AAA 1.5V alkaline batteries or USB cable. (Normal can be used for 18 months.)
- 3)The sound alarm will alert when the voltage is low, the door will open automatically.
NFC Key Card Installation Guide — Android
- Note: For Android, copy rfid key to your phone's wallet via NFC fucntion.
NFC Key Card Installation Guide — IOS
- Note: For iOS, you need to hold an existing transit card or bank card, the card needs to be configured successfully, and add this card to IPhone Wallet.
Pre-Installation Preparation(IOS)
1. need an existing transportation card or bank card X1
2. an Iphone with wallet function X 1
3. electronic lock with AAA battery X 1
Add an existing transportation card or bank card
1. Install the battery, then use the included screwdriver to insert it into the hole of the reset button (it can be reset when you hear the sound of Di).
2. Hold the traffic card or bank card near the induction area of the lock until you hear a short sound (successful configuration).
3. Open your IPhone wallet and add this existing card scan to your phone
Input NFC Signal
1. Re-open the wallet and click Use Card.
2. After the electronic lock is unlocked, enter the mobile phone card information and confirm the input with two beeps.
-Postage is FREE for Australian residents.
-International orders will have shipping calculated at checkout. Any applicable duties are not included and are the responsibility of the purchaser.
-All items will be shipped within 2 business days
-We use multiple couriers to get the best possible delivery times. Your parcel may be delivered by courier or Australia Post depending on your location.
Delivery Times:
Australia:
Expected delivery time is between 3-10 business days for most items within Australia. In the rare instance that a delivery takes longer than this, please contact us to work out a solution.
International:
Orders may take approx. 7-21 business days to most countries worldwide.
Related Products
