Motion Sensor Alarm Indoor: Wireless Motion Detector Alarm with Siren & Strobe (125Db, 328Ft Remote Control, Battery Operated), Portable Door Chime Bell Alert Burglar for Shop Home Garage Shed Car
10 In Stock Out of stock 10
- More Professional Design: Our house alarm uses the latest infrared detection technology and intelligent analysis algorithms, which can effectively distinguish interference signals and human movement signals to prevent false alarms. Detection range of the infrared sensor of 16-26ft, remote control distance up to 328ft in open area, activates 125dB siren and strobe light when it detects an intruder.
- Protect Your Family and Property: Motion detectors are essential in a home security system, AMHEY is a complete stand-alone motion sensor-based alarm system for Driveway, window,garage,car anti theft,stair,office,Store.Motion sensor alarm systems can used to prevent children from sneaking out, preventing pets from going to somewhere,nearby wild animals or strangers approach.
- Multi-Function, Multi-Mode - This outdoor motion sensor alarm has TWO modes(doorbell mode or alarm mode); TWO volume levels; Besides, it provides a remote control (key fob), pressing the panic button on the remote and the host will alarm immediately. It's not only an alarm, but also a door motion sensor chime, caregiver pager.
- Easy Installation and Operation: Using the film sticker, it can be installed in less than 30s(We provide two screws and a film sticker). portable motion detector alarm has two power supply methods(AAA battery or USB charging),don't worry about running out of power in an emergency. You can take it when you go to live in a tourist hotel alone or camp outdoors.Note: Please read the manual carefully before use
- Note: The volume is adjustable..Package Contents: 1 x Motion Sensor Alarm,1 x Remote Control,3 x AAA batteries,1 x Double Side Tape,2 x screw,1 x Instruction manual.
Product Description
Wireless Infrared Home Alarm Systems, AMHEY Motion Sensor Alarm with Siren Strobe Light Remote Control
The AMHEY Motion Detector Alarm is a complete, self-contained alarm system for your home, shed, garage, caravan or boat. Easy installation and operation.
AMHEY PIR Motion Sensor Alarm is intended to detect when people enter your shop or your home. Depending on your need, it will sound a loud siren alarm or a friendly chime.
The PIR motion sensor alarm can be operated directly on the device or with a remote control.It has two levels of volume adjustment, ringtone and alarm switching function.
Multiple remotes and alarms can be connected to form an AMHEY home alarm system, allowing your team or family members to arm or disarm the PIR motion sensor alarm as well.
125dB Siren with Warning LightThe sensitive pir sensor system will remind you and your family that someone entering or leaving your home. |
Panic ButtonIn either mode, press the panic button on the remote control and the host will immediately alarm. |
Doorbell ModeIn doorbell mode, the motion detector will sound an alarm when a visitor enters or passes through the detection zone.. |
Attic StairsPrevent children and pets from sneaking out |
Window Alarm SensorProtect of indoor property, improve home security |
Pet Motion Detector AlarmPrevent pet from stealing food or walking around. |
Technical specifications
- Power: DC 5V /3pcs * AA Batteries
- Detection Distance:<8m
- Alarm sound:125dB
- Detection Angle:110 degree
- Operating humidity: <80%
TIPS:
Please read the instruction manual in detail before using the product
What's in the box
- 1 x Motion Sensor Alarm
- 1 x Remote Control
- 3 x AAA batteries
- 1 x Double Side Tape
- 1 x Instruction manual
- 2 x Screws and Screw rubber plugs
- 1 x USB Charging Cable
- The motion sensor alarm has two states: armed state and disarmed state. After powering on, SHORT press the On/off Button to switch whether the host is armed or disarmed. When armed state is triggered, the host will flash a light every second for the next 10 seconds, and then it will start to detect and alarm.
- Low Battery Reminder:When the host is low power, the LED flashes once every 40 seconds, and the host sounds three beeps.
- Volume Adjustment:After powering on, SHORT press the Volume Button to adjust the volume of the host.
- Mode Selection:After powering on, SHORT press Mode Button key to select alarm mode or doorbell mode.
- Power on and off
- When the product is in the power-off state (neither built-in battery nor connected to USB charging), as long as the product is installed with AAA battery or connected to USB for charging, the product will automatically turn on.
- When the product is in the power-off state(Connected to the power supply), LONG press the On/off Button, and the host will turn on with a quick beep followed by the LED light.
- Remove the battery or USB, and the host will turn off.
- the power-on state, LONG press the On/off Button, the LED light will flash once with a long "di" sound, and then the host will turn off.
- Connect remote control
- LONG press the Volume button after turning on, the host's detection light is on, and it enters the learning state. At this time, press any button on the remote control to pair with the host.
- When the connecting is successful: the host indicator flashes 2 times and "di" twice;
- When connecting is repeated: the indicator light of the host flashes once with a beep;
- When the connecting is full: the host indicator flashes 3 times with three beeps.
- Remove remote control
- In the learning state, LONG press the Volume Button for 5 seconds, the host's warning light flashes 5 times and the siren sounds 5 times, then all the connected remote controls are deleted.
- Note:a) button on the remote control to switch between 4 modes (loud alarm sound, low alarm sound, loud DingDong sound, and low DingDong sound).b) The host can learn 20 remote controls.c) In the learning state, SHORT press any key of the host or no operation for more than 20 seconds, the host will exit the learning state.
- Restore Factory Settings
- Step 1: Unplug the power supply and remove the battery;
- Step 2: Press and hold the Mode Button;
- Step 3: Connect the power supply (battery or USB charging), the host will beep 10 times; and then it will beep 5 times quickly and the LED will flash 5 times quickly.
- Step 4: Then release the button, the host will be restored to factory settings. At this time, the host is in the armed state of the alarm mode.
-Postage is FREE for Australian residents.
-International orders will have shipping calculated at checkout. Any applicable duties are not included and are the responsibility of the purchaser.
-All items will be shipped within 2 business days
-We use multiple couriers to get the best possible delivery times. Your parcel may be delivered by courier or Australia Post depending on your location.
Delivery Times:
Australia:
Expected delivery time is between 3-10 business days for most items within Australia. In the rare instance that a delivery takes longer than this, please contact us to work out a solution.
International:
Orders may take approx. 7-21 business days to most countries worldwide.