• BLUETOOTH V4.1: The latest Bluetooth 4.1+EDR technology provides lower power consumption and wider compatibility. You could enjoy your smart phone music or handsfree calling through your car stereo system.
• AUTO-ON & AUTO-CONNECT: This Bluetooth car kit will power on automatically when you start the car, then auto sync with the last connected phone (please make sure the Bluetooth of your phone is turned on before starting the car)
• THE GROUND LOOP NOISE ISOLATOR INCLUDED: In most cases, the sound quality is excellent. If you are bothered by the buzzing noise, you could use this noise isolator to avoid it.
• CONNECT To 2 PHONES: With the multipoint technology, the Besign BK01 Bluetooth Car Kit can connect to 2 devices at the same time. Dual Port Car charger included: Comes with a 10 watt dual port 2.1A cigarette lighter power adapter, stand ready to charge additional devices at the same time.
• What's in the Box: 1X BK03 Bluetooth Car Receiver, 1X Dual USB Port Car charger, 1X Ground Loop Noise Isolator, 1X Air Vent Clip, 1X Mounting Sticker, 1X User Instruction.

Besign BK03 Bluetooth 4.1 Car Kit with Dual Port USB Car Charger and Ground Loop Noise Isolator for Car with 3.5mm AUX input Port

Bluetooth V4.1
Bluetooth 4.1 technology offers significantly lower power consumption and more stable signal transmission, thus giving you a lossless audio transmission and crystal-clear phone calls and music.

Adding Bluetooth function with your Car
Instant solutions to turn car stereo system into bluetooth wireless environment for hand free calls on the road and access to the music on mobile devices.

The Ground Loop Noise Isolator for pure music quality
With the Ground Loop Noise Isolator, which helps decrease the buzzing noise in some cars while playing music or handsfree calling, thus giving you the better music or calling experience.

Support two phones simultaneously
You can connect with two smart phones with the multi-point support of this Bluetooth AUX adapter

Siri or Voice Command
One Button to activate the Siri or Voice Command
In the standby mode, press & hold the Blue Button for 2 seconds to activate the voice command function on Andriod or iOS devices. Refer to the phone manual for detailed instruction if applicable.

Air Vent Clip for Easy Installation.
Special design with Air Vent Clip included, you could install this Bluetooth car kit with your car very easily.

FAQ
1. How to use this car receiver?
A. your car must have a 3.5mm Aux port.
D. Switch the car audio to AUX when you use this car receiver.
2. The calling volume is very low and music volume is very loud:
Call and music volume is different setting in your smart phone. If you change the car audio volume, the difference is still there.
Adjust the call volume when your smart phone in the call or dialing mode only.
Note: iPhone first Bluetooth connection, call volume will decreased to a very low level, you need to adjust it manually as above.
3. Auto-On: Auto-on is activated by the impulse current.
The impulse current activation will be failed if the twice power supply in short time, you need to turn on the car kit manually in this case. Example as follows:
When change the power supply from car engine to the battery.
Other conditions caused the power supply changed or transferred in short time.
4. No calling voice from this car receiver.
A. Open your bluetooth setting, and click this car receiver, then check if you have select all the related profiles for this car receiver.
B. For iPhone, please receive the phone call via this car receiver button; the calling will transfer to your phone speaker if you receive the phone call from your iPhone, this is iPhone Bluetooth setting.

In the Box

• Besign BK03 Bluetooth Car Kit
• USB Car Charger
• Mounting Sticker
• Air Vent Clip
• The Ground Loop Noise Isolator