• WIDE COMPATIBILITY - Recommended by YouTube Star Scotty Kilmer on his channel.Works on most vehicles sold in the USA with model year of 1996 or newer. Displays in English, German, French, Spanish, Finnish, Dutch, Russian, and Portuguese; Requires no battery or charger as the unit gets power directly from the OBDII Data Link Connector in the vehicle.
• CRITICAL FUNCTIONALITY - Reads quickly and erases stored emission-related codes, pending codes, and shows code definitions. Turns off the MIL (check engine light), helps in resetting the monitor before taking it to Smog, and tells you what is going on before bringing the car in for repair.
• ENHANCED OBDII DIAGNOSTICS - Supports O2 Sensor and EVAP (Evaporative Control) System Test. AD410 code scanner can be used to initiate a leak test on a vehicle's EVAP system by monitoring the integrity of the fuel tank system. The O2 Sensor Test is designed to monitor and adjust air/fuel mixture, which will help identify and troubleshoot issues related to fuel efficiency and vehicle emission.
• QVGA DISPLAY & NEW UI - AD410 code reader is a greatly enhanced upgrade from more basic diagnostic scan tools. It has a 2.4" TFT true color (262K) LCD display for clear test results showing. With an easy-to-read UI design, the user can easily access Setup, OBDII Diagnostics, I/M readiness, and DTC Look-up and Review. You don't need to read the manual to know what to do, even for a beginner.
• DIAGNOSTIC REPORTS & UPDATE - The "Review & Print" option can be used to save or print diagnostic reports as needed. ANCEL brand provides life-time free software updates for this unit to fix the latest bugs or add new parameters. Just download the software from the ANCEL website and then follow on-screen instructions to install.

ANCEL AD410 OBDII Scanner

Where's the OBDII interface?

• The OBD2 port is often under the dash, or under a panel below the handbrake in the centre console.

How to get started?

• Simply plug into the OBD II port on your car and turn the ignition on and you ready to go.

Why I can't erase the fault code?

• The fault causing the fault code to show will need to be repaired first then code can be erased.

NOTE:

• Works on vehicle with 12V battery ONLY
• Must be 16 PIN OBD II protocol
• ANCEL AD410 only supports car engine system diagnostics and does not support other system diagnostics.
• Due to the complexity of the agreement of cars produced by car manufacturers, please let we know your vehicle information if you can't confirm that whether the scanner can work on your vehicles.

Check Engine Light

INTRODUCTION TO AD410

ANCEL AD410 is a greatly enhanced upgrade from more basic car code readers. It has the capability to read and erase fault codes when the check engine light comes on. It also shows real-time live data reported by the ECU, including engine temperature, O2 sensor readings, among other things. The device is easy to use and no prior experience with diagnostic tools is required.

• Detect Engine System
• Turn Off the Check Engine Light
• Let You Know the Meaning of the Error Code

KEY FEATURES

• Reads and clears check engine light codes, both generic and manufacturer-specific, and resets monitor
• Built-in DTC look-up library for manual retrieval and code definition
• I/M Readiness to test misfire, fuel system and Comprehensive component
• Displays all data stream items or selects any item of live data for graphing
• Views freeze frame data and shows vehicle parameters recorded by ECU when an emission-related fault occurs

• Performs O2 sensor test to allow retrieval and viewing of O2 sensor monitor test results for the most performed tests from the vehicle's on-board computer
• Uses On-board monitor test to read the results of on-board diagnostic monitoring
• Performs EVAP system test to detect any leak in the vehicle's EVAP system (not all vehicles support EVAP test and test availability depends on what's installed on the OBDII system by the manufacturer)
• Displays vehicle information via VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration Verification Number)

CODE DEFINITION

There is a built-in up-to-date OBD-II DTC look-up library in this device. Fault codes and their definitions can be found in the library. A 2.4" TFT true color (262K) LCD display is fitted to provide a clear reading of the information contained in it. After a fault code is detected, the definition of the code will be shown by directly clicking the fault code selected.

DATA STREAM

The scan tool lets you view "real-time" Live Data. This information includes values (volts, rpm, temperature, speed etc.) and system status information (open loop, closed loop, fuel system status, etc.) generated by the various vehicle sensors, switches and actuators. It supports detailed text display, and you can view all data stream items or select a certain item of live data with a graph.

I/M READINESS

I/M readiness is to test Misfire / Fuel system / Comprehensive component. Quickly monitor emissions readiness check and drive cycle verification. Let you know the comprehensive status of your car's engine system. Help you pass the Smog Check easily."N/A" means Not Available on this vehicle, "INC" means Incomplete or not ready, "OK" means Completed or Monitor Ok.

POWERFUL CPU

Unlike other Cheap and Old versions, ANCEL AD410 scanner goes with a more advanced STM 32-bit CPU has the specialty of high speed, compressed volume and steady performance.